Onewheel Tubeless Set-Up

PinkOak Accessories Onewheel

‘Tyre Yogurt’ is not just for bikes, its formula makes it a perfect partner for all rideable electric devices, be them one, two, three or four wheeled.

Our Onewheel ambassadors explained that the build/ design of their float makes resolving a flat tyre on the go virtually impossible, hence many riders choosing to run a tubeless sealant to prevent flats happening. 

‘Tyre Yogurt’ latex free tyre sealant does not separate, clump or dry out and seals up to 6mm holes. There are millions of fibres and fillers held in suspension in the sealant, so when a puncture occurs, the air in the tubeless tyre forces them into the hole or cut. This forms a flexible plug that prevents further air loss. As the tyre moves and flexes, more fibres are forced into the hole, reinforcing the plug.

As the liquid we use in ‘Tyre Yogurt’ does not dry out, it has no shelf life so it can be re-used and should last for the life span of your tyre.

If you are adding ‘Tyre Yogurt’ for the first time, make sure your tyre inner is clean and that the hub in smoothly taped (Gorilla Tape does the job perfectly) before adding 150 ml of tubeless sealant and rebuilding. If you are already running our product and spot that you have had a number of punctures, then the nozzle on the 150 ml bottle, or the optional applicator hose, allows you to top-up directly through the valve, once the valve core has been removed.

Once added/ topped-up, a good bounce of the Onewheel will help it thoroughly coat the inside of the tyre.